Atomic and molecular LIBS spectra of Al alloys and composite materials for nanosecond and microsecond excitation

Authors

  • Roman Ostrowski Institute of Optoelectronics, Military University of Technology
  • Wojciech Skrzeczanowski Institute of Optoelectronics, Military University of Technology
  • Antoni Rycyk Institute of Optoelectronics, Military University of Technology
  • Krzysztof Czyż Institute of Optoelectronics, Military University of Technology
  • Antoni Sarzyński Institute of Optoelectronics, Military University of Technology
  • Marek Strzelec Institute of Optoelectronics, Military University of Technology
  • Karol Jach Institute of Optoelectronics, Military University of Technology
  • Robert Świerczyński Institute of Optoelectronics, Military University of Technology

DOI:

https://doi.org/10.4302/plp.v9i4.763

Abstract

Spectral investigations in the UV-VIS range of selected Al alloys and composites, used in the construction of armament components as well as drones, were performed using LIBS technique. Two Nd:YAG lasers were applied: a short pulse 4 ns 60 mJ laser and a long pulse 200/400 (up to 1000) us (~ 2/4 up to 10 J) laser. In experiments with a short laser pulse only atomic spectra were observed while for long pulses, also molecular transitions have been recorded. Electron temperatures of created plasma were found on the base of Boltzmann law. Temperatures are clearly higher for short pulse excitation.

Full Text: PDF

References
  1. A. Miziolek, V. Palleschi and I. Schechter, Laser-Induced Breakdown Spectroscopy (Cambridge, Cambridge University Press 2006). CrossRef
  2. M. Sabsabi and P. Cielo, "Quantitative Analysis of Aluminum Alloys by Laser-Induced Breakdown Spectroscopy and Plasma Characterization", Appl. Spectrosc. 49, 499 (1995). CrossRef
  3. D.L. Death, A.P. Cunningham, and L.J. Pollard, "Multi-element analysis of iron ore pellets by Laser-induced Breakdown Spectroscopy and Principal Components Regression", Spectrochim. Acta B, 63, 763 (2008). CrossRef
  4. S. Laville, M. Sabsabi and F. Doucet, "Multi-elemental analysis of solidified mineral melt samples by Laser-Induced Breakdown Spectroscopy coupled with a linear multivariate calibration", Spectrochim. Acta B, 62, 1557 (2007), CrossRef
  5. D.M. Surmick, C.G, Parigger, "Aluminum Monoxide Emission Measurements in a Laser-Induced Plasma", Applied Spectroscopy, 2015, V.68, No.9, P.992-996. CrossRef
  6. J.B. Sirven, B. Bousquet, L. Canioni and L. Sarger,"Laser-Induced Breakdown Spectroscopy of Composite Samples: Comparison of Advanced Chemometrics Methods", Anal. Chem. 78, 1462 (2006). CrossRef
  7. E.J. Judge, G. Heck, E.B. Cerkez and R. J. Levis, "Discrimination of Composite Graphite Samples Using Remote Filament-Induced Breakdown Spectroscopy", Anal. Chem. 81, 2658 (2009). CrossRef
  8. L.M. Cabalin and J.J. Laserna, "Experimental determination of laser induced breakdown thresholds of metals under nanosecond Q-switched laser operation", Spectrochim. Acta B, 53, 723 (1998). CrossRef
  9. T.A. Labutin, A.M. Popov, V.N. Lednev and N.B. Zorov, "Correlation between properties of a solid sample and laser-induced plasma parameters", Spectrochim. Acta B, 64, 938 (2009). CrossRef
  10. J.S. Cowpe, R.D. Moorehead, D. Moser, J.S. Astin, and S. Karthikeyan, "Hardness determination of bio-ceramics using Laser-Induced Breakdown Spectroscopy", Spectrochim. Acta B, 66, 290 (2011). CrossRef
  11. G. Cristoforetti, , S. Legnaioli, V. Palleschi, A. Salvetti, and E. Tognoni, "Effect of target composition on the emission enhancement observed in Double-Pulse Laser-Induced Breakdown Spectroscopy", Spectrochim. Acta B, 63, 312 (2008). CrossRef

Downloads

Published

2017-12-31

How to Cite

[1]
R. Ostrowski, “Atomic and molecular LIBS spectra of Al alloys and composite materials for nanosecond and microsecond excitation”, Photonics Lett. Pol., vol. 9, no. 4, pp. pp. 116–118, Dec. 2017.

Issue

Section

Articles